It is possible to set up a private WLAN that bridges the WAN port and is seperated from the mesh network.
Please note that you should not enable
The private WLAN can be enabled through the config mode if the package
gluon-luci-private-wifi is installed.
You may also enable a private WLAN using the command line:
uci set wireless.wan_radio0=wifi-iface uci set wireless.wan_radio0.device=radio0 uci set wireless.wan_radio0.network=wan uci set wireless.wan_radio0.mode=ap uci set wireless.wan_radio0.encryption=psk2 uci set wireless.wan_radio0.ssid="$SSID" uci set wireless.wan_radio0.key="$KEY" uci set wireless.wan_radio0.disabled=0 uci commit wifi
$SSID by the name of the WLAN and
$KEY by your passphrase (8-63 characters).
If you have two radios (e.g. 2.4 and 5 GHz) you need to do this for radio0 and radio1.
It may also be disabled by running:
uci set wireless.wan_radio0.disabled=1 uci commit wifi