It is possible to set up a private WLAN that bridges the WAN port and is separated from the mesh network.
Please note that you should not enable
The private WLAN is encrypted using WPA2 by default. On devices with enough flash and a supported radio,
WPA3 or WPA2/WPA3 mixed-mode can be used instead of WPA2. For this to work, the
feature has to be added to
It is recommended to enable IEEE 802.11w management frame protection for WPA2/WPA3 networks, however this can lead to connectivity problems for older clients. In this case, management frame protection can be made optional or completely disabled in the advanced settings tab.
The private WLAN can be enabled through the config mode if the package
gluon-web-private-wifi is installed.
You may also enable a private WLAN using the command line:
RID=0 SSID="privateWLANname" KEY="yoursecret1337password" uci set wireless.wan_radio$RID=wifi-iface uci set wireless.wan_radio$RID.device=radio$RID uci set wireless.wan_radio$RID.network=wan uci set wireless.wan_radio$RID.mode=ap uci set wireless.wan_radio$RID.encryption=psk2 uci set wireless.wan_radio$RID.ssid="$SSID" uci set wireless.wan_radio$RID.key="$KEY" uci set wireless.wan_radio$RID.disabled=0 uci set wireless.wan_radio$RID.macaddr=$(lua -e "print(require('gluon.util').generate_mac(3+4*$RID))") uci commit wifi
$SSID by the name of the WLAN and
$KEY by your passphrase (8-63 characters).
If you have two radios (e.g. 2.4 and 5 GHz) you need to do this for radio0 and radio1.
It may also be disabled by running:
uci set wireless.wan_radio0.disabled=1 uci commit wifi