Status-Page
When the feature gluon-status-page
is enabled, Gluon nodes run a HTTP server with status information on all IP addresses of br-client
.
This makes it possible to check information of the node in realtime.
If the mesh protocol gluon-mesh-batman-adv
is installed too, the package gluon-status-page-mesh-batman-adv
is added too according to the Feature flags
Example Picture
The left side of the status page contains Overview information. In the middle, current monitoring information abut the system, number of clients, radios, amount of traffic and connected mesh-vpn if any are shown. The right side of the Status-Page contains information about Neighbours to this node through Wired mesh (Mesh-on-WAN/LAN) as well as wireless mesh.

Mesh Graphs
When wireless mesh is enabled, the mesh interfaces show realtime Graphs about the received signal strength (RSSI) in dBm.
Neighbours
The list of neighbours at first shows the mac-address of the neighbour it sees.
The status-page sends a second request to http://[ipv6]/cgi-bin/dyn/neighbours-nodeinfo?mesh-vpn
which triggers the lookup of neighbour information on the node itself.
Through this, the actual nodenames of the neighbours are shown on the status-page as can be seen in the Example Picture.