Gluon 2021.1

Important notes

Upgrades to v2021.1 and later releases are only supported from releases v2018.2 and later. This is due to migrations that have been removed to simplify maintenance.

Added hardware support

ath79-generic

  • Plasma Cloud

    • PA300 1

    • PA300E 1

  • TP-Link

    • Archer C2 v3

    • Archer D50 v1

ipq40xx-generic

  • AVM

    • FRITZ!Box 7530

  • Plasma Cloud

    • PA1200 1

    • PA2200

ramips-mt7620

  • Netgear

    • EX3700

    • EX3800

1(1,2,3)

This device is supposed to be set up outdoors and will therefore have its outdoor mode flag automatically enabled.

Major changes

Multicast optimizations (batman-adv)

In this release, we reenable the multicast optimizations, that have gone through another round of bug squashing upstream. With this feature batman-adv will distribute IPv6 link-local multicast packets via individual unicast packets instead of flooding them through the whole mesh as long as the number of subscribed nodes does not exceed 16. This reduces layer 2 overhead, especially for IPv6 Neighbor Discovery.

We also relaxed the firewall for IPv6 multicast packets: Instead of always dropping non-essential multicast packets we now allow all IPv6 link-local multicast packets to pass when the destination group has up to 16 subscribers

Status page

The status page has received much attention in this release and now exposes many more details that help to understand a node’s setup remotely.

Among other things, we now expose wireless client count per radio, the mac80211 identifiers, the frequencies radios are tuned to, as well as information about the VPN provider and details on the mesh protocol stack.

gluon-switch-domain utility

The gluon-switch-domain utility has been introduced to allow for a standard way to encapsulate the steps required for safely switching between domains. Existing packages like the hoodselector and the scheduled-domain-switch have been tied in with gluon-switch-domain.

It has an experimental --no-reboot flag that requires further testing, to ensure it doesn’t accidentally bridge separate domains.

Other changes

  • The private WLAN interface is now assigned the interface name wan_radioX where X is the phy index.

  • Linux kernel has been updated to 4.14.235

  • The kernel’s mac80211 stack has been updated to 4.19.193-test1 to mitigate the FragAttacks vulnerabilities

  • OpenSSL has been updated to 1.1.1k, fixing CVE-2021-3449 and CVE-2021-3450

  • Dropbear has been patched against mishandling of special filenames in its scp component (CVE-2020-36524)

Bugfixes

  • The firmware partition lookup in gluon-web-admin’s firmware update page was using an old partition label and therefore failed to look up the available flash size. This resulted in misleading error messages in case the uploaded firmware file exceeds the flash size.

  • Android 9 and higher do not properly wake up to renew their MLD subscriptions, therefore dropping out of the Neighbor Discovery MLD group, which leads to broken IPv6 connectivity after the device has slept for a while. A workaround has been deployed to wake these devices up in regular intervals to prevent this regression.

Internal

Mesh-VPN Abstraction Layer

In preparation for the introduction of new tunneling protocols, the gluon-mesh-vpn framework has been modularized. This allows for providers to use a standard interface and keep their implementation details in a dedicated package.

Continuous Integration

  • GitHub Actions

    • GitHub actions is now enabled for the Gluon project, build-testing all available targets.

    • CI jobs are now run based on which paths have been modified.

    • Linters for lua and shell scripts have been integrated.

Known issues

  • Upgrading EdgeRouter-X from versions before v2020.1.x may lead to a soft-bricked state due to bad blocks on the NAND flash which the NAND driver before this release does not handle well. (#1937)

  • The integration of the BATMAN_V routing algorithm is incomplete.

    • Mesh neighbors don’t appear on the status page. (#1726) Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput metric.

    • Throughput values are not correctly acquired for different interface types. (#1728) This affects virtual interface types like bridges and VXLAN.

  • Default TX power on many Ubiquiti devices is too high, correct offsets are unknown (#94)

    Reducing the TX power in the Advanced Settings is recommended.

  • In configurations without VXLAN, the MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled (#496)

    This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is disallowed).