Gluon 2022.1.4

Added hardware support


  • LibreRouter

    • LibreRouter (v1)

  • Teltonika

    • RUT230 (v1)


  • Aerohive

    • HiveAP 121


    • WNDR4300 (v1)


  • Arcadyan

    • o2 Box 6431


  • Cudy

    • X6 (v1, v2)

  • D-Link

    • DAP-X1860 (A1)

  • GL.iNet

    • GL-MT1300

  • Mercusys

    • MR70X (v1)

  • Xiaomi

    • Mi Router 3G


  • TP-Link

    • RE200 (v3)


  • D-Link

    • DGS-1210-10P


  • AVM

    • FRITZ!Box 7520


  • Mikrotik

    • hAP ac2


  • Enterasys WS-AP3705i now uses the correct image-name for use with the autoupdater (#2819)

  • Reduce memory Usage for ath10k on ZyXEL WRE6606 devices (#2842)

  • Replace the Workaround for failed boots on ath79 with a proper fix. (#2784)

  • AVM FRITZ!Box 7360 v2 flashed with the incorrect image for v1 will automatically update to the correct image.

  • Revert OOM inducing switch of ath79 Wave2 firmware back to -ct (#2879)

Known issues

  • Upgrading EdgeRouter-X from versions before v2020.1.x may lead to a soft-bricked state due to bad blocks on the NAND flash which the NAND driver before this release does not handle well. (#1937)

  • The integration of the BATMAN_V routing algorithm is incomplete.

    • Mesh neighbors don’t appear on the status page. (#1726) Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput metric.

    • Throughput values are not correctly acquired for different interface types. (#1728) This affects virtual interface types like bridges and VXLAN.

  • Default TX power on many Ubiquiti devices is too high, correct offsets are unknown (#94)

    Reducing the TX power in the Advanced Settings is recommended.

  • In configurations without VXLAN, the MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled (#496)

    This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is disallowed).